How to block crochet

How to block crochet (and why you should!)

Written by: Jeff Tse

|

|

Time to read 7 min

Introduction

Blocking is a crucial step in the crochet process that can elevate your projects to new heights. Whether you're a beginner or an experienced crocheter, understanding how to block your crochet projects can make a significant difference in the final appearance and drape of your creations. In this comprehensive guide, we'll explore the importance of blocking, the different methods available, and step-by-step instructions to help you master this essential technique.

Blocking is the process of shaping and setting your crochet work by introducing moisture and allowing it to dry in the desired shape. This technique is particularly useful for smoothing out uneven stitches, correcting the shape of your project, and enhancing intricate stitch patterns. While some crocheters may view blocking as an optional step, it can provide numerous benefits, including improving the overall appearance of your work, enhancing stitch definition, correcting curling edges, and facilitating the joining of multiple motifs.

There are several blocking methods to choose from, depending on the type of yarn and project you're working with. Wet blocking involves soaking your crochet piece in water, while steam blocking uses the steam from an iron to relax the fibers without direct contact. Spray blocking is similar to wet blocking but involves lightly spraying your project with water before pinning it into shape. In this guide, we'll walk you through each method step-by-step, ensuring you have the knowledge and confidence to block your crochet projects like a pro.

💡 Did you know

Blocking crochet has its roots in the 19th century, coinciding with the rise of crochet as a popular craft during the Victorian era. Initially, crochet was primarily a practical skill, but as intricate lacework and decorative designs gained popularity, the need for a polished finish became evident. Crocheters discovered that blocking could effectively smooth uneven stitches, enhance stitch definition, and correct shapes, resulting in more aesthetically pleasing projects. Over time, various blocking methods emerged, including wet blocking, steam blocking, and spray blocking, each tailored to different yarn types. Today, blocking is recognized as an essential technique for achieving professional-quality crochet work.

What is Blocking?

Blocking is the process of shaping and setting your crochet work by introducing moisture and allowing it to dry in the desired shape. This technique is particularly useful for smoothing out uneven stitches, correcting the shape of your project, and enhancing intricate stitch patterns.


Types of Blocking

There are several methods of blocking, each suited to different types of yarn and projects. The most common methods include:

  1. Wet Blocking : This involves soaking your crochet piece in water, then shaping and pinning it to dry. It’s effective for most natural fibers and can help open up lacework.
  2. Steam Blocking : This method uses the steam from an iron to relax the fibers without direct contact. It’s ideal for delicate projects or when you want to avoid submerging your work in water.
  3. Spray Blocking : Similar to wet blocking, this technique involves spraying your project with water to dampen it before pinning it into shape.

Why You Should Block Your Crochet

Blocking is often viewed as an optional step, but it can make a significant difference in the final appearance of your work. Here are some reasons why you should consider blocking your crochet projects:

  • Improves Appearance : Blocking helps to smooth out uneven stitches and can enhance the overall look of your project, giving it a more professional finish.
  • Shapes Your Work : It allows you to shape your crochet items to the desired dimensions, making them more visually appealing and functional.
  • Enhances Stitch Definition : For intricate patterns, blocking can help define the stitches, making the design more pronounced and beautiful.
  • Corrects Curling Edges : Many crochet stitches tend to curl, especially at the edges. Blocking can help flatten these curls, making your project lay flat.
  • Facilitates Joining : If you’re working with multiple motifs, blocking can help ensure that they are all the same size, making it easier to join them together.

Basic Supplies You’ll Need

Before you begin blocking your crochet projects, gather the following supplies:

  • Blocking Board : A foam blocking board or a thick towel can serve as your blocking surface. Some boards come with grid lines to help you measure and shape your work accurately.
  • Rustproof Pins : Use rustproof pins to secure your crochet piece to the blocking board. T-pins or blocking wires can also be helpful for larger projects.
  • Spray Bottle : If you’re using the spray blocking method, a spray bottle filled with water will be necessary.
  • Iron (for steam blocking) : A steam iron can be used for steam blocking, but ensure it does not touch the yarn directly.
  • Towel : A clean towel is useful for soaking and drying your crochet piece.

How to Block Crochet: Step-by-Step Instructions

Step 1: Prepare Your Crochet Piece

Before blocking, ensure that your crochet piece is clean. If you’ve just finished crocheting, it may have some dirt or oils from your hands. If necessary, wash your piece according to the care instructions on your yarn label.

Step 2: Choose Your Blocking Method

Decide which blocking method you will use based on the yarn type and project. Here’s a brief overview of each method:


Wet Blocking

  1. Soak Your Piece : Submerge your crochet item in cold or lukewarm water for about 15-30 minutes. If you’re using wool, consider adding a wool wash to the water.
  2. Remove Excess Water : After soaking, gently squeeze out the excess water without wringing or twisting the fabric, which can distort the stitches.
  3. Lay Flat to Dry : Place your crochet piece on a towel, roll it up gently to remove more water, and then lay it flat on your blocking board.
  4. Pin in Place : Use rustproof pins to secure the edges and shape your piece to the desired dimensions.
  5. Allow to Dry : Let your crochet piece dry completely before removing the pins.

Steam Blocking

  1. Set Up Your Iron : Fill your iron with water and set it to the steam setting. Ensure that the iron does not touch your crochet piece.
  2. Pin Your Piece : Lay your crochet item flat on the blocking board and pin it into shape.
  3. Steam the Fabric : Hold the iron just above the crochet piece and release steam over the fabric. The steam will help relax the fibers and shape the piece.
  4. Let It Cool : Allow the piece to cool while pinned in place to set the shape.

Spray Blocking

  1. Spray Your Piece : Lay your crochet item flat on the blocking board and spray it lightly with water until damp.
  2. Pin in Place : Use rustproof pins to secure the edges and shape your piece.
  3. Allow to Dry : Let your crochet piece dry completely before removing the pins.

Step 3: Check for Evenness

As your project dries, check to ensure that all edges are even and that the piece is lying flat. Adjust any areas that may need more shaping or pinning.

Step 4: Remove Pins and Finish

Once your crochet piece is completely dry, carefully remove the pins. Your project should now have a polished, professional look!

Tips for Successful Blocking

  1. Read Your Yarn Label : Always check the care instructions on your yarn label before blocking. Different fibers require different treatments.
  2. Use Enough Pins : Don’t skimp on pins. Using a generous number of pins will help maintain the shape of your project as it dries.
  3. Test on a Swatch First : If you’re unsure about how your yarn will react to blocking, test the method on a small swatch first.
  4. Avoid High Heat on Acrylic : If you’re working with acrylic yarn, avoid high heat or direct steam, as it can melt the fibers.
  5. Block After Washing : If you wash your crochet item, consider re-blocking it afterward to restore its shape.
  6. Consider the Project Type : Not all crochet projects need to be blocked. For example, amigurumi typically doesn’t require blocking, while lacework and garments greatly benefit from it.

FAQs About Blocking Crochet

Q1: Can I block acrylic yarn?

Yes, you can block acrylic yarn, but be cautious with heat. Use low heat or steam blocking methods, and avoid soaking it in water, as acrylic fibers can be water-resistant.


Q2: How do I know if my crochet project needs blocking?

If your crochet piece appears uneven, puckered, or has curling edges, it likely needs blocking. Projects with intricate stitch patterns, like lace, benefit the most from blocking.


Q3: Do I need to block my crochet blanket?

While many blankets look fine without blocking, those made with natural fibers or open stitches will benefit from a quick blocking to even out the shape and enhance drape.


Q4: How often should I block my crochet items?

You should block your crochet items whenever you feel they need it, especially after washing or if they appear uneven. Regular blocking can help maintain the shape and appearance of your work.


Q5: Can blocking fix mistakes in my crochet?

Blocking can help even out stitches and improve the overall appearance, but it cannot correct fundamental mistakes like missed stitches or incorrect stitch counts.

More Crochet Techniques

How to block crochet